Services
What do you need tested?
Purpose-built rigs for subsea equipment, and a laboratory for the fluids and the materials they touch. Pick a service below.
Equipment
Laboratory
Equipment · Thermoplastic umbilical hoses
Umbilical testing
SFS tests thermoplastic umbilical hoses on hydraulic fluids and production chemicals, with pressure cycling, burst and permeability testing to ISO 13628-5 / API 17E and customer specifications.
Thermoplastic hose cycle testing to ISO 13628-5 / API 17E.
- Typically 40 and 70 °C at 5,000 psi (345 bar) cycling
- Permeability, burst pressure and service life prediction
- Hydraulic fluids and production chemicals
30 to 365 days
Typical test duration, hoses tested at agreed intervals
We have a large number of individual rigs for testing thermoplastic umbilical hoses on both hydraulic fluids and production chemicals, with test cycles to ISO 13628-5 / API 17E and/or customer-specific requirements. Pressure cycling confirms that a fluid and material combination will meet its service life.
Rig capabilities
- Bespoke rigs covering a range of test conditions
- Short and long-term cycle durations
- Range of test temperatures and pressures
- Static pressure ageing
- Permeability testing at pressures up to 5,000 psi (345 bar)
- High DWP pressure test
- Continuous performance monitoring
- Data acquisition sampling at 2,000 samples per second
Typical testing
- Qualification testing to ISO 13628-5 / API 17E
- Typical test temperatures 40 and 70 °C (104 and 158 °F) or higher
- Typical cycling pressure 5,000 psi (345 bar)
- Typical durations 30 to 365 days, hoses removed and tested at agreed intervals
- Optical microscope and SEM inspection of core surface
- Tensile testing to assess changes in core, braid and sheath
- Fluid analysis to monitor changes, e.g. plasticiser levels
- Service life prediction
- Burst pressure assessment
